WX not update as flight progresses in v3 beta

The interface is correct: copied direct from v2 and checked.
There is no "connect" selection" that I see and no auto connect selection as in v2. I will delete all of v3 and download a new file and see what happens. Maybe something is missing.

CONNECTION PROBLEM SOLVED: I completly removed the original downloaded file and deleted everything in the FXrealWXv3 folder; downloaded a new file and now the Connect/Disconnect tab appears. When loaded with FSX running, I selected "connect" and "Download WX" all okay for the airport where I was located: KAHN.
Next, I flew to KATL not far away and displayed WX remains at KAHN. This was the original problem I had.
Weather download continues to show download in 15min -- it does not change and show Weather update in 600s and never changes.

Next i moved the aircraft to a new location, KMXF, and weather still shows KAHN WX.

Settings in Weather are:
Source is NOAA
Direct Wind Control set 1/s and 1kn/s
Weather mode is Direct
Coulds and Visibilty are default settings.

Thanks for your continued help!

Also, selecting "Set WX" has no effect at but when "download WX" is selected wx changes to the new location, download time indicator now is changing and weather update is changing. I moved aircraft to a new location, WX changed on FSX screen but in FSXrealWX screen it still shows wx for the last location many miles away.

Try to close FSrealWXv3, in the program directory clear the folder "temp" In my case path "C:\Program Files (x86)\FSrealWX 3.0\tmp" then run the program again. I got the same problem and solved it that way.

Emptying the tmp file worked but only for a short distance - about 100nm and picked up 3 weather reports. after that, the 15 min timer went down to 3 min and the weather update dropped to 180s then stopped with no additional downloads or wx updates. Restarted the program and re=loaded WX and reset the WX. Timers then remained at 15 min and 900 sec. Tried deleting all info in the tmp file and re-starting the program -- no change.... tried deleting the file, down loading wx and re-setting WX and time move to 14 minutes and 873s -- no further change and no additional wx updates. Reloaded v2.04.863 and it works fine.

Thank you for report.

Weather-mode: Direct or File?
Interface: FSUIPC or Simconnect?

Weather Mode is Direct
Interface is FSUIPC v4.949p

I just noticed when I loaded v2 it connected via SimConnect version 10.0.61259.0. V3 is connecting to FSUIPC

Looking at the data log, I see two errors:
(Controller) DWC-ErrorNum:17
(Controller) - JobD31: JobName:0:-1 Finished, Error:17

Set Interface "FSUIPC/SimConnect" or "Simconnect" for FSX/P3D.
Set Path from FSX/P3D.
Set Weather-Mode "Weather-File"

I changed from FSUIPC to FSUIPC/SimConnect and set the Weather Mode to "Weather-File" and all seems to be working okay. I'll let you know if I have any further problems, but right now it looks good.

Thanks for the help..